Working principle
Brazing the stainless steel plates together eliminates the need for sealing gaskets and thick frame plates. As well as holding the plates together at the contact points, the brazing material seals the package. Baode's brazed heat exchangers are brazedat all contact points, ensuring optimal heat transfer efficiency and pressure resistance. The plates are designed to achievelongest possible lifetimes. Since virtually all material is used for heat transfer, the brazed plate heat exchanger is very compactin size and has a low weight and a low hold-up volume. The bphe (brazed plate heat exchanger ) consists of thin corrugatedstainless steel plates which are vacuum brazed together using copper as the brazing material. Copper brazed units can be used for numerous of applications. For food applications and applications involving aggressive fluids, nickel brazed units are requested.

Refrigeration systems:
Evaporator,
Condenser,
Economizers and desuperheaters
Air dryer
Heat pump
Absorption chiller

HVAC
Radiant floor,
Snow melt,
Boiler
Solar water heat exchanger
District heating

Other industrial applications such as:
Heat recovery and
Oil cooler: Hydraulic oil cooling, engine oil cooling, and fuel oil heating.
Steam heating.
Flat plate heat exchanger
Beer wort cooler
Milk pasteurization
Wind turbine oil cooler
Marine oil cooler

Short delivery time.
High quality
Reasonable price
Customer made
Know-how design and customer support

Model	BL120
Width, A [mm]	246
Height, B [mm]	528
Length, E [mm]	13+2.36n
Horizontal port distance, C [mm]	174
Vertical port distance, D [mm]	456
Max pressure [Mpa]	3
Max flowrate [M3/h]	42
Weight [kg]	7.2+0.52n

Model

BL1

Application
Swimming pool water heating. Simple, strong, compact and
highly reliable, Baode Brazed Plate heat exchangers are designed to efficiently reheat
and maintain temperature of water in swimming pools of all
dimensions and capacities from primary heat source such as
boiler, solar installation, heat pump etc.

Standard design
Complete packaged module including:
Stainless steel plate heat exchanger, for operation with sea water or slightly corrosive water (balneo-therapy,
thermal spring water).

Standard materials

Cover plates: Stainless steel AISI 316

Connections: Stainless steel AISI 316

Plates: Stainless steel AISI 316

Brazing material: Copper

Particulars required for quotation

To enable Baode's representative to make a specific quotation, enquiries should be accompanied by the following particulars:

– flow rates or heat load required

– temperature program

– physical properties of liquids in question

– desired working pressure

– maximum permitted pressure drop

Short delivery time.

High quality

Reasonable price

Customer made

Know-how design and customer support

Model	BL14	BL20	BL26	BL26C	BL50	BL95
Width, A [mm]	78	76	111	124	111	191
Height, B [mm]	206	310	310	304	525	616
Length, E [mm]	9+2.3n	9+2.3n	10+2.36n	13+2.4n	10+2.35n	11+2.35n
Horizontal port distance, C [mm]	42	42	50	70	50	92
Vertical port distance, D [mm]	172	282	250	250	466	519
Max pressure [Mpa]	3	3	3	3/4.5	3/4.5	3/4.5
Max flowrate [M3/h]	3.6	3.6	8.1	8.1	12.7	39
Weight [kg]	0.6+0.06n	1.0+0.08n	1.3+0.12n	2.2+0.16n	2.6+0.19n	7.8+0.36n

Model	BL120	BL190	BL200	BL1400	BL100 *	BL200 *
Width, A [mm]	246	307	321	429	248	322
Height, B [mm]	528	696	738	1398	495	739
Length, E [mm]	13+2.36n	13+2.75n	13+2.7n	22+2.78n	10+2.15n	13+2.55n
Horizontal port distance, C [mm]	174	179	188	220	157	205.2
Vertical port distance, D [mm]	456	567	603	1190	405	631
Max pressure [Mpa]	3	3	2.1	1.5	3/4.5	3/4.5
Max flowrate [M3/h]	42	100	100	300	42	100
Weight [kg]	7.2+0.52n	12.5+0.72n	13+0.75n	31.8+1.73n	6.5+0.37n	13+0.78n